This article show a OBDSTAR X300 DP Plus test case on Fiat Delphi 93C66 PIN code reading.If you want to get more test case,check here:OBDSTAR X300 DP Plus test cases.

Procedures:

Connect OBDSTAR X300 DP Plus to Fiat,then enter the menu to select “FIAT V32.00”

After waiting a moment for system build connection and configuration

Tap “Pre-Coding”

Select “DELPHI 93C66(B)(ID48)”

Vehicle equipped with this unit:

Albea,Doblo(2000-2010),Punto,Palio,Strada

Tap “Yes” to continue

OBDSTAR X300 PAD2 will give the massage:

This function is available by connecting the server,please ensure the internet connection is normal

Tap “Enter” to continue

After then you need to select “Read EEPROM(93C66)”,the tap “Enter” to continue

Follow the screen prompt to switch ignition on

Switch ignition off

Then switch the ignition on again

Logging,please wait about 5 minutes…

Please enter a filename to save

Now you can get the PIN code

Done!

How to program remote keys for KIA Forte 2011 with OBDSTAR X300 DP PLUS? The job can be done just in minutes. Let’s see what we need to do.

Step 1:
Open Mobile Keydiy (KD) app installed on your phone and run it to generate a remote (Make sure the Bluetooth in your phone is on).

Step 2:
Press DP on the device screen.

Step 3:
Select Diag Program -> MMOBILISER -> KIA.

Step 4:
Choose your car’s version, then wait a few seconds.

Step 5:
You’ll go to an interface as below. Choose Select From Type -> Remote -> 16 PIN -> Type1 -> Program Remotes, then wait it communicating.

Step 6:
Insert the key to switch the ignition on. After that, immediately switch the ignition off and remove the key. Press Enter to continue.

Step 7:
Press the Lock/Unlock button on the key for more than 1 second.

Step 8:
Program succeed! Press Enter to continue if you want to program one more remote.

Step 9:
Repeat step 7 with another key and all is done!

How-to: generate and program Hyundai i20 smart key with VVDI Mini Key Tool and XTOOL X100 PAD2.

Step 1: Generate remote with VVDI Mini Key Tool

Insert Xhorse universal smart key into detection coil

Select Vehicle Remote->Hyundai->Elite i20 C7000 ID46 433 15+ 3BTn 2432

Press Generate

Generating remote in progress

Generate remote succeed

Step 2: Program smart key with xtool x100 pad2

Connect X100 pad 2 with vehicle via OBD socket

Select Hyundai->Security Code->47 Authorization code (smart card)

Enable network connection before reading security code

Turn on ignition switch

Read security code success

Select Program Immobilizer/remote->Smart key system->China-> Type 5 (without card slot)

Press Start button to continue

Select Program smart keys

Xtool X100 pad 2 will ask to enter security code to access

Put the original key close to the Start button

Program success. Press YES to program next key

Put the smart key to be programmed close to the Start button

Program smart key success

Test remote control and start car.

Done.